PULL-OFF, BOND STRENGTH-WITH DIGITAL DIAL

(1).  E142-01 PULL-OFF 0-5 KN CAPACITY

PULL-OFF 0-5 KN CAPACITY

Description

Identical to mod. E142 but with load cell and digital display range 0-5 kN for more accurate measurements on low strength values.

• ACCESSORIES

CODE	DESCRIPTION
E142-10	SOFTWARE FOR PULL-OFF TESTER
E143	ADHESION ALUMINIUM DISC 20 MM DIA. (10 PIECES)
E143-01	ADHESION ALUMINIUM DISC 50 MM DIA. (10 PIECES)
E143-02	TUNGSTEN CARBIDE BIT, DIA. 20 MM
E143-03	TUNGSTEN CARBIDE BIT DIA. 50 MM
E143-10	ADHESION TEST STAINLESS STEEL DISC, DIA. 50 MM (10 PIECES)
E143-11	CYLINDRICAL RING DIA 50 MM
E143-12	ACRYLIC ADHESIVE GLUE, 300 ML CARTRIDGE
E143-13	ADHESION ALUMINIUM DISC, SQUARE 50X50 MM (10 PIECES)

(2).  E142 DIGITAL PULL-OFF STRENGTH TESTER 16 KN                  CAPACITY

DIGITAL PULL-OFF STRENGTH TESTER 16 KN CAPACITY

Description

This dynamometer measures the adhesive force and the tensile strength of two layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.) and is particularly suitable for applications concerning testing repairs of any structure where the bond strength between two layers is an essential factor.
Compact, light and suitable for use in any location, this Pull-Off Tester is fitted with a load cell and high resolution large digital display unit; it is therefore suitable for measurements from low loads up to 16 kN, granting a wide working range and ideal for a large number of applications and materials. The direct tensile force is applied by rotating the hand wheel.
The three feet of the unit can be fixed in the “large” position (overall dimensions 176mm diameter) with very stable bearing, or in the “compact” position (overall dimensions 92,5mm diameter), to perform tests in narrow spaces, or for specimens close one to the other.

Specifications:
- Load capacity: 16 kN
- Resolution: 10 N
- Working range: 0,25 to 16 kN
- Accuracy and repeatability: better than +/- 1%
- Complete with traceable calibration certificate
- Battery operated
- Serial port for PC connection
- Hand wheel rounds: 60 with mechanical round/counter
- Graphic indication of the applied load rate
- Seat ball assuring axial/central load application
Supplied complete with carrying case, but WITHOUT accessories to perform the test, which have to be ordered separately.
To perform the test a common electric drill is required.

Dimensions: 410 x 210 xh 270 mm
Weight: 3,5 kg approx.

• ACCESSORIES

CODE	DESCRIPTION
E142-10	SOFTWARE FOR PULL-OFF TESTER
E143	ADHESION ALUMINIUM DISC 20 MM DIA. (10 PIECES)
E143-01	ADHESION ALUMINIUM DISC 50 MM DIA. (10 PIECES)
E143-02	TUNGSTEN CARBIDE BIT, DIA. 20 MM
E143-03	TUNGSTEN CARBIDE BIT DIA. 50 MM
E143-10	ADHESION TEST STAINLESS STEEL DISC, DIA. 50 MM (10 PIECES)
E143-11	CYLINDRICAL RING DIA 50 MM
E143-12	ACRYLIC ADHESIVE GLUE, 300 ML CARTRIDGE
E143-13	ADHESION ALUMINIUM DISC, SQUARE 50X50 MM (10 PIECES)