MAXXTURN 45

Main and counter spindle

Tool Turret

Driven tools for milling and drilling operations

Y axis directly implemented in the machine construction

EMCO bar or swing loader

Siemens or Fanuc control

HIGHLIGHTS

BASIC STRUCTURE FRONT

Basic structure front

TAILSTOCK

Tailstock

MAXXTURN 45 MAIN SPINDLE

Maxxturn 45 main spindle

MAXXTURN 45 COUNTER SPINDLE AND PARTS CATCHER

Maxxturn 45 counter spindle and parts catcher

BASIC STRUCTURE FRONT

Basic structure front

TAILSTOCK

Tailstock

MAXXTURN 45 MAIN SPINDLE

Maxxturn 45 main spindle

MAXXTURN 45 COUNTER SPINDLE AND PARTS CATCHER

Maxxturn 45 counter spindle and parts catcher

MAXXTURN 45

• High thermostability, precise machining and rapid motion speed
• Very stable Y axis with long travel
• High-precision C axis
• Driven tools 12 time VDI25 radial turret with single-motor engineering
• Very compact machine layout
• State-of-the-art control technology from Siemens of Fanuc for simple dialog-supported programming

OVERALL DIMENSIONS/WORK SPACE

Work area

Machine layout

WORKPIECES

SUPPORTING BRACKET

Supporting bracket made of free cutting steel

CAMSHAFT

Camshaft made of brass

CAMSHAFT

DISTRIBUTOR

Distributor made of brass

PUSH-ON CONTACT

Push-on contact made of steel

SUPPORTING BRACKET

Supporting bracket made of free cutting steel

CAMSHAFT

Camshaft made of brass

CAMSHAFT

DISTRIBUTOR

Distributor made of brass

APPLICATION AREAS:

• Hydraulic/pneumatic components
• Motors and vehicle parts
• Medical engineering
• Sliding and rolling bearings
• Materials handling technology
• Fixing systems etc.

VERSIONS

Maxxturn 45

MAXXTURN 45 MY (SIEMENS)

with tailstock, Y and C axis and driven tools

MAXXTURN 45 MY (FANUC)

with tailstock, Y and C axis and driven tools

MAXXTURN 45 S (SIEMENS)

with counter spindle

MAXXTURN 45 S (FANUC)

with counter spindle

MAXXTURN 45 SM (SIEMENS)

with counter spindle, 2 time C axes and driven tools

MAXXTURN 45 SM (FANUC)

with counter spindle, 2 time C axes and driven tools

MAXXTURN 45 SMY (SIEMENS)

with counter spindle, Y axis, 2 times C axes and driven tools

MAXXTURN 45 SMY (FANUC)

with counter spindle, Y axis, 2 times C axes and driven tools

OPTIONS/ACCESSORIES

PART CATCHER

Finished parts are transported from the counter spindle to the finished parts container with the aid of the part catcher. This proven EMCO concept with the swiveling catcher ensures optimum access to the work area, free chip flow and careful removal of the finished parts.

FINISHED PART CONVEYER

The finished-part pick-up device puts the parts on an accumulating conveyer. A discontinuous belt ensures that the often very complex parts do not fall onto each other.

EMCO TOOL BREAK MONITORING

The tool status is monitored by evaluating the load on the various axis drive motors. Excessive loads point to wear or broken tools. Too low load indicates a tool is missing.

BAND FILTER WITH HIGH-PRESSURE COOLANT PUMPS

A coolant pressure of 25/40/60 or 80 bar can be set as needed. This enables coolant-fed drilling and milling tools to be used to their best advantage.

AUTOMATION

EMCO SHORT-BAR LOADER LM800

The EMCO LM800 is the perfect solution for the automatic reloading of pre-cut bars up to 800 mm. The adavantage: small footprint and short loading times through shorter strokes. The control unit is perfectly adapted to the interface of the machine. 

EMCO TOP LOAD 8-42/3200

The EMCO TOP LOAD series was designed for feeding 3-meter long bar material into EMCO machines fully automatically. The EMCO TOP LOAD 8-42/3200 loads bar material having a diameter of up to Ø 42 mm.

UNLOADING THROUGH THE COUNTER SPINDLE

Long, slender workpieces can be removed from the machine through the counter spindle. Long parts can be stowed in different ways. The finished parts can either simply roll down an inclined surface, or be stored in a lateral magazine using a discontinuous belt.

SWING LOADER

Universal loading and unloading for preformed blanks and parts. Using the multiple grippers and handling systems the swing loader can be customized to your individual needs.

SOFTWARE/CONTROL

SINUMERIK 840D-SL INCL. SHOPTURN

The Sinumerik 840D sl is a universal and flexible CNC system. The Sinumerik 840D sl offers a wide range of functions. It is ideally suited for applications using the most diverse technologies.

FANUC 31I-B

The Series 30i/31i/32i-MODEL B CNCs have been developed for the next generation of high performance machine tools

Their enhanced functionality and superior performance extends the potential of machine capabilities into the future.

ESPRIT - MAXXTURN 45/65 (OPTIONAL)

The sensational CAM solution for turning and turning/milling. ESPRIT greatly simplifies the programming of complex machining processes and significantly reduces set-up times.