MAXXTURN 65

Main and counter spindle Tool

Turret

Driven tools for milling and drilling operations

Y axis directly implemented in the machine construction

EMCO bar and gantry loader

Siemens Sinumerik 840D sl

HIGHLIGHTS

CONTROL

Control

TOOL TURRET

Tool turret

HIGH-PRECISION Y-AXIS

Core machine construction

PART PICK-UP DEVICE

Part pick-up device

SPINDLE MOTOR

Spindle motor

CONTROL

Control

TOOL TURRET

Tool turret

HIGH-PRECISION Y-AXIS

Core machine construction

PART PICK-UP DEVICE

Part pick-up device

MAXXTURN 65

• High thermostability and precise machining High rapid motion speed
• Very stable Y axis with long travel High-precision C axis
• Driven tools 12 time VDI30 (VDI 40)
• radial turret with single-motor engineering
• Very compact machine layout
• State-of-the-art control technology from Siemens of Fanuc for simple dialog-supported programming

OVERALL DIMENSIONS/WORK SPACE

Machine layout

Work area BMT55

Work area_VDI30

Work area_VDI40

WORKPIECES

SPIRIT LEVEL

Spirit level

WINCH

Winch made of brass

DRIVE PULLEY

Drive pulley made of aluminium

DISTRIBUTOR

Distributor made of brass

ADJUSTOR SLEEVE

Adjustor sleeve made of stainless steel

SPIRIT LEVEL

Spirit level

WINCH

Winch made of brass

DRIVE PULLEY

Drive pulley made of aluminium

DISTRIBUTOR

Distributor made of brass

APPLICATION AREAS

• Hydraulic/pneumatic components
• Motors and vehicle parts
• Medical engineering
• Sliding and rolling bearings 
• Materials handling technology
• Fixing systems etc.

VERSIONS

Maxxturn 65

MAXXTURN 65 M (SIEMENS)

With driven tools and C axis

MAXXTURN 65 M (FANUC)

With driven tools and C axis

MAXXTURN 65 MY (SIEMENS)

With driven tools, C axis and Y axis

MAXXTURN 65 MY (FANUC)

With driven tools, C axis and Y axis

MAXXTURN 65 SM (SIEMENS)

For complete machining with driven tools and C axis

MAXXTURN 65 SM (FANUC)

For complete machining with driven tools and C axis

MAXXTURN 65 SMY (SIEMENS)

For complete machining with driven tools, C axis and Y axis

MAXXTURN 65 SMY (FANUC)

For complete machining with driven tools, C axis and Y axis

OPTIONS/ACCESSORIES

PART CATCHER

Finished parts are transported from the counter spindle to the finished parts container with the aid of the part catcher. This proven EMCO concept with the swiveling catcher ensures optimum access to the work area, free chip flow and careful removal of the finished parts.

FINISHED PART CONVEYER

The finished-part pick-up device puts the parts on an accumulating conveyer. A discontinuous belt ensures that the often very complex parts do not fall onto each other.

EMCO TOOL BREAK MONITORING

The tool status is monitored by evaluating the load on the various axis drive motors. Excessive loads point to wear or broken tools. Too low load indicates a tool is missing.

BULL'S EYE

The rotating window gives you the best possible view of the machine's work area, so you can observe the cutting process even when coolants are being used.

TOOL MEASUREMENT

The tool measurement sensor mounted in the work area of the HYPERTURN makes it possible to measure tools in both the upper and lower turret within the machine.

BAND FILTER WITH HIGH-PRESSURE COOLANT PUMPS

A coolant pressure of 25/40/60 or 80 bar can be set as needed. This enables coolant-fed drilling and milling tools to be used to their best advantage.

AUTOMATION

GANTRY LOADER

Universal loading and unloading for preformed blanks and parts. Using the multiple grippers and handling systems the gantry loader can be customized to your individual needs.

EMCO SHORT-BAR LOADER LM1200

The EMCO LM1200 is the perfect solution for the automatic reloading of pre-cut bars up to 1200 mm. The adavantage: small footprint and short loading times through shorter strokes. The control unit is perfectly adapted to the interface of the machine.   

EMCO TOP LOAD 10-65/3300

Compact single-loader for the automatic loading of bars in the diameter range from 10 to 65 mm and a length up to 3.3 meters.

UNLOADING THROUGH THE COUNTER SPINDLE

Long, slender workpieces can be removed from the machine through the counter spindle. Long parts can be stowed in different ways. The finished parts can either simply roll down an inclined surface, or be stored in a lateral magazine using a discontinuous belt.

SOFTWARE/CONTROL

SINUMERIK 840D-SL INCL. SHOPTURN

The Sinumerik 840D sl is a universal and flexible CNC system. The Sinumerik 840D sl offers a wide range of functions. It is ideally suited for applications using the most diverse technologies.

ESPRIT - MAXXTURN 45/65 (OPTIONAL)

The sensational CAM solution for turning and turning/milling. ESPRIT greatly simplifies the programming of complex machining processes and significantly reduces set-up times.